Yard shunter training
Yard shunter. Safe in the yard.
RTITB accredited yard shunter training at your site, using your own shunters and trailers. Novice, existing and refresher courses.

RTITB accreditedRecognised certificationWhat is a yard shunter?
A yard shunter, also called a terminal tractor or shunt truck, is a tractor unit built to move semi-trailers around a yard, depot or port. It couples to a trailer with a fifth wheel, moves it on and off the loading bays and parks it up, often many times a shift, in tight spaces with pedestrians and other vehicles about.
HSE guidance highlights coupling and uncoupling, and trailers moving away unexpectedly, as key risks in this work. Our training gives drivers a safe routine for every trailer move. Successful candidates receive an RTITB certificate.
Walk-round checksWhy train your shunter drivers
Every vehicle, every shiftChoose your course
Minimum hours by group size, set by RTITB.
Novice
About 3 days for a group of three| 1 driver | 13h 30m |
| 2 drivers | 16h 15m |
| 3 drivers | 21h 15m |
Existing
About 2 to 3 days for a group of three| 1 driver | 11h 30m |
| 2 drivers | 13h 15m |
| 3 drivers | 17h 15m |
Refresher
About 1 day for a group of three| 1 driver | 4h 30m |
| 2 drivers | 6h 15m |
| 3 drivers | 7h 30m |
Minimum training and testing hours set by RTITB for yard shunters (Course Duration Matrix v36.0526). Breaks are not included and some drivers may need longer. Up to three drivers per instructor.
What you'll cover
- Legal duties and health and safety
- Pre-use inspection of the shunter
- Coupling and uncoupling with the fifth wheel
- Connecting and disconnecting air and electrical lines
- Landing legs and trailer parking brakes
- Manoeuvring and reversing onto loading bays
- Hand signals and working with a banksman
- Pedestrian and yard traffic safety
- Safe parking procedures
- Licensing, including driving on public roads
- Practical and theory assessment
- RTITB certificate on successful completion
Loading bay work
Tight yard spaces
Certified driversWhere you train
At your premises
Yard shunter training takes place at your site, using your own shunters, trailers and loading bays, so drivers learn in the yard they work in.
We offer on-site training at customer premises, which can be fully tailored to the training requirements of your working environment.
- Train on your own vehicles and trailers
- Practise on your own bays and yard layout
- Minimise disruption to your operations
- Cost-effective for groups
Quick answers
Do yard shunter drivers need a driving licence?
On a private yard with no public access, the law does not require a DVLA licence, although many employers ask for one. If a shunter goes onto a public road it must be registered and road legal, and the driver must hold the right licence category, which is C+E for a tractor unit pulling a semi-trailer. We cover this on the course.
How often should shunter drivers be retrained?
There is no fixed legal interval. Common practice, in line with RTITB guidance, is a refresher every three to five years, and sooner after an incident, a near miss or a change of vehicle.
Is a forklift certificate enough to drive a yard shunter?
No. Each type of equipment needs its own training and certificate, so a forklift certificate does not cover a yard shunter.
Can you train our banksmen as well?
Yes. We run RTITB accredited banksman training, which pairs well with shunter training for busy yards and loading bays.
Other equipment
Each truck type needs its own certificate.
